Spoilers, Flaps, and Air Dams: Service and Repair
Fitting Front Lip - GT2The 911 GT2 is lowered by approx. 30 mm as standard to lower the centre of gravity of the vehicle. The front lip is not fitted on the vehicle for protection when loading or unloading the vehicle. The front spoiler and fastening screws included with the vehicle must be fitted.
NOTE: Lift the vehicle on a lifting platform to fit the front spoiler.
1. Insert the front spoiler -1- into the groove on the front end. Ensure that all locking tabs have engaged.
2. Place the sheetmetal nut -5- in position on the front end. Use the fastening screws -4- and spacer sleeves -3- to tighten the front spoiler at the sides to the wheel housing liner -2-.