Removal and Replacement

Removing And Installing Horn







INFORMATION: Both horns are fastened on a bracket on the right front side between the body and condenser.

Removing horn

INFORMATION:
- The high-pitch horn can be removed from below through the sound outlet opening.
- The entire front spoiler must be removed in order to remove the low-pitch horn.

1. Pull off electrical plug connection and observe installation position of the horn.







2. Unscrew the M6 hexagon nut from the bracket and remove the high-pitch horn through the sound outlet opening.

Installing horn
1. Observe installation position of the horns.

The horn must not touch the body or a bracket.

A toothed washer must be fitted between the horn and bracket.

Tightening torque of the M6 hexagon nut: 10 Nm (7.5 ftlb.)