Cylinder Head Assembly
- Initial tightening to 30 Nm (22 ftlb.)
- Loosen all screws again in reverse order.
- Tighten screws to 20 Nm (15.0 ftlb.)
- Retighten scews to 20 Nm (15.0 ftlb.)
- Retighten screws with torque angle of 1 x 90°(Degrees).
- Initial tightening to 30 Nm (22 ftlb.)
- Loosen all screws again in reverse order.
- Tighten screws to 20 Nm (15.0 ftlb.)
- Retighten scews to 20 Nm (15.0 ftlb.)
- Retighten screws with torque angle of 1 x 90°(Degrees).