Replacing Remote Control

966255 Replacing Remote Control

Disassembling remote control

Removing cover of hand-held transmitter
1. Insert a small screwdriver between the cover and the bottom part of the hand-held transmitter -arrow- and carefully lift off the cover.

Removing Cover Of Hand-held Transmitter:

Removing hand-held transmitter key
1. Push the sliding latch back using a small screwdriver -arrow A- and pull the key out of the bottom part.

Removing Hand-held Transmitter Key:

Removing battery for hand-held transmitter
1. Loosen the locking tab -arrow a- and remove the battery.

Removing Battery For Hand-held Transmitter:

Assembling remote control

Installing battery for hand-held transmitter
1. Insert battery and press it in until the locking tab clicks into place.

Installing Battery For Hand-held Transmitter:

Installing hand-held transmitter key

NOTE: The lock code from IPAS must be specified when ordering a new key.

1. Push the key into the bottom part until the sliding latch -arrow- engages perceptibly.

Installing Hand-held Transmitter Key:

Installing cover of hand-held transmitter
1. Position the cover on the bottom part of the hand-held transmitter and press together until the cover clicks into place.