Disassembling and Assembling Rear Spoiler

635537 Disassembling And Assembling Rear Spoiler

Preliminary work
1. Remove rear spoiler.

NOTE: Only for vehicles with ParkAssist.

2. Remove sensor for ParkAssist.
3. Remove number plate light.
4. Remove wiring harness for number plate light.

NOTE: Only for USA/Canada version vehicles.

5. Remove rear bumper horn.

Disassembling rear spoiler

Removing the lower retaining strip

Main Illustration Of Rear Apron:

1. Bore out rivets -2- and lower retaining strip -1-.

Removing The Lower Retaining Strip:

Removing cover cap

Main Illustration Of Rear Apron:

1. Carefully press out the cover cap -2- with a screwdriver. The securing cord -3- the cover cap -2- and the rear end -1- are joined as they pull out.

Removing Cover Cap:

Removing frame

Main Illustration Of Rear Apron:

1. Unlock frame -1- by pressing the lugs -arrows- and remove from the rear apron -2-.

Removing Frame:

Assembling rear spoiler

Installing covering frame

Main Illustration Of Rear Apron:

1. Position the frame -1- on the rear apron-2- and press in until the locking tabs -arrows- lock into place.

Removing Frame:

Installing cover cap

Main Illustration Of Rear Apron:

1. Pull the securing cord -3- into the eyelet of the rear apron -1-. Insert cap -2- into the rear apron -1-.

Installing Cover Cap:

Installing the lower retaining strip

Main Illustration Of Rear Apron:

1. Push on lower retaining strip -1- and fasten with tubular rivets -2-.

Installing The Lower Retaining Strip:

Subsequent work

NOTE: Only for USA/Canada version vehicles.

1. Install rear bumper horn.
2. Install wiring harness for number plate light.
3. Install number plate lights.

NOTE: Only for vehicles with ParkAssist.

4. Install sensor for ParkAssist.
5. Install rear spoiler.