681219 Removing and installing lid for glove compartment

Removing And Installing Lid For Glove Compartment

Preliminary work

Remove glove compartment. Refer to Removing and installing glove compartment.

Removing lid for glove compartment







1. Open the glove compartment.
2. Press shock absorber for glove compartment -1- carefully out of the fastening tab -2-.







3. Turn stop -1- 45° in -direction of arrow- and remove it.







4. Drive out pin rod -3-, remove washer -4- and then detach the lid -1- from the glove compartment -2- (-direction of arrow-).







Installing lid for glove compartment







1. Check rubber stops to the left and right -2- before installing the glove compartment lid -1- and replace them if necessary.







2. Position lid -1- and washer -4- on the glove compartment -2- and press in the pin rods -3- (-arrows-).







3. Close the glove compartment slightly, position stop -1- on the lid and turn 45° in -direction of arrow-.







4. Press shock absorber for glove compartment -1- into the fastening tab -2-.







5. Close glove compartment.

Subsequent work

Install glove compartment. Refer to Removing and installing glove compartment.