Procedures

668919 Removing And Installing Rear-view Mirror

Removing rear-view mirror

Removing trim panel for mirror triangle

Installation Position For Mirror Triangle Trim Panel:

1. Carefully lever out trim panel for mirror triangle -1- using plastic wedge -Arrow A- and pull upwards -Arrow B-.

Removing Trim Panel For Mirror Triangle:

2. Press -2- electrical plug connection -Arrow C- and pull off -2- the plug -Arrow D-.
3. Remove trim panel for mirror triangle -1-.

Removing seal for mirror triangle

Installation Position Of Rear-View Mirror:

1. Pull out seal for mirror triangle from cable cutout opening for door mirror.

Seal For Mirror Triangle:

Disconnecting electrical plug connection

Installation Position Of Rear-View Mirror:

1. Disconnect the plug connection of the mirror housing -3-.

Disconnecting Plug Connection:

Removing rear-view mirror

Installation Position Of Rear-View Mirror:

1. Unscrew fastening screws -4- and remove mirror housing -5-.

Removing Rear-View Mirror:

Installing rear-view mirror

Installation Position Of Rear-View Mirror:

1. Position mirror housing -5- and tighten with M6 fastening screws -4-.
Tightening torque: Final tightening 4 ftlb.

Installing Rear-View Mirror:

Locking electrical plug connection

Installation Position Of Rear-View Mirror:

1. Connect the plug connection of the mirror housing -3-.

Locking Plug Connection:

Fitting seal for mirror triangle

Installation Position Of Rear-View Mirror:

1. Stick seal for mirror triangle at cable cutout opening on door mirror to the basic door frame.

Seal For Mirror Triangle:

Installing trim panel for mirror triangle

Installtion Position For Mirror Triangle Trim Panel:

1. Lock electrical plug connection -2- until it audibly engages.

Installing Trim Panel For Mirror Triangle:

2. Hook cover -1- into the door triangle from above -Arrow E- and press into the fastening clips on the underside until it engages audibly -Arrow F-.