Engine - Updated Crankshaft Sealing Ring
1Boxster (987)
5/05 ENU 1359
Date: 4-14-09
New Crankshaft Sealing Ring On Flywheel Side
Vehicle Type:
Boxster (987)/Boxster S (987)
Model Year:
As of 2005
Concerns:
New crankshaft sealing ring on flywheel side.
Information:
Crankshaft sealing ring on flywheel side leaking.
Because of possible leaks at the crankshaft sealing ring, a new crankshaft sealing ring has been installed in the engines of the vehicles mentioned above since May 17, 2005.
The new crankshaft sealing ring is made from a different material (PTFE). The modified sealing lip design is the same as that of the crankshaft sealing ring used in Cayenne engines.
In the event of a complaint or when carrying out engine repair work that involves replacing the crankshaft sealing ring, the new crankshaft sealing ring must always be installed.
Information
^ For information on the assembly tools to be used, refer to the Workshop Manual!
Information
^ The new crankshaft sealing ring (sports cars) can be identified not only by its Part No. but also by its green assembly sleeve.
^ The crankshaft sealing ring with a white assembly sleeve is only designed for Cayenne engines and must not be installed in the engines of sports cars.
Date of
Introduction:
May 17, 2005, from the Engine Nos.
M96/25 61508519
M96/26 62507322
Parts Info:
--> 997.101.212.00 New/crankshaft sealing ring, flywheel side
--> 999.113.490.41 Previous/ditto, no longer available
References:
--> Workshop Manual 'Removing and installing crankshaft sealing ring - flywheel side'
Enclosure:
Removing and installing crankshaft sealing ring - flywheel side
Preliminary work for crankshaft sealing ring on flywheel side
Manual transmission:
1 Remove manual transmission --> Workshop Manual '343519 Removing and installing transmission - chapter on "removing"'.
2 Remove clutch --> Workshop Manual '305019 Removing and installing clutch - chapter on "removing"'.
3 Remove double-mass flywheel --> Workshop Manual '136019 Removing and installing double-mass flywheel - chapter on "removing"'.
Tiptronic:
4 Remove automatic transmission --> Workshop Manual '373519 Removing and installing automatic transmission - chapter on "Removing"'.
5 Remove drive plate for converter --> Workshop Manual '136319 Removing and installing drive plate for converter - chapter on "removing"'.
Subsequent work for crankshaft sealing ring on flywheel side
Manual transmission:
6 Install double-mass flywheel --> Workshop Manual '136019 Removing and installing double-mass flywheel - chapter on "installing"'.
7 Install clutch --> Workshop Manual '305019 Removing and installing clutch - chapter on "installing"'.
8 Install manual transmission --> Workshop Manual '343519 Removing and installing transmission - chapter on "installing"'.
Tiptronic:
9 Install drive plate for converter --> Workshop Manual '136319 Removing and installing drive plate for converter - chapter on "installing"'.
10 Install automatic transmission --> Workshop Manual '373519 Removing and installing automatic transmission - chapter on "Installing"'.
Disclaimer