Removing and Installing Console For Telephone

Removing And Installing Console For Telephone

Technical values







Removing console for telephone












1. Unscrew the two fastening screws -1- and remove the mounting plate -2-.







2. Carefully unclip the cover -3- with a screwdriver.
3. Unscrew the fastening screw -4- and remove the carrier -5-.







4. Unscrew the fastening screw -6- and remove the trim -7-.







5. Unscrew the three fastening screws -8- and remove console for the telephone -9-.

Installing console for telephone







1. Position console for telephone -9- and screw down with the three fastening screws -8-. - Tightening torque: 1.5 ft. lbs. ± 0.2 ft. lbs.







2. Press trim -7- on the console and screw down with the fastening screw -6-. - Tightening torque: 1.5 ft. lbs. ± 0.2 ft. lbs.







3. Press carrier -5- on the console and screw down with the fastening screw -4-. - Tightening torque: 1.5 ft. lbs. ± 0.2 ft. lbs.

4. Position the cover -4- and clip it into place.







5. Secure the mounting plate with the fastening screws -1-. - Tightening torque: 1.5 ft. lbs. ± 0.2 ft. lbs.

6. Place the handset in the bracket.