Body - SportDesign(R) Package Installation: Overview

Boxster (987)
1/06

March 21, 2006

SportDesign Package (I No. XAL)

Vehicle Type:
Boxster (987)/Boxster S (987)

Model Year:
As of 2005

Situation:
Installation Instructions





Note:
The SportDesign package in the rear area consists of a new rear apron with an integrated diffusor and a re-designed automatically extending rear spoiler. Two attachments (spoiler lips) have been developed for the front of the vehicle. These are installed on the standard front apron.

The components were tested and approved as a set. The installation of individual components is not approved by Porsche.

The SportDesign package is also available as a factory installed option on new vehicles by requesting the option code "XAL".








Parts Information/Parts List





Material





Tools

ATTENTION
Minor slope transitions on the Aerokit front apron compared to the standard part can damage (destroy or break) accessories or other vehicle components.

--> Loading the vehicle or driving in multi-story parking garages with extremely steep ramps can catch and damage the underside of the trim panel.

--> Avoid steep ascents, descents or ramps wherever possible.

--> Always drive according to the prevailing driving conditions.

ATTENTION
Danger of damage if the vehicle is pushed using the spoiler.

--> Do not push vehicle using rear spoiler.

ATTENTION
Washing the vehicle in an automatic car wash can damage (destroy or break) accessories or other vehicle components

--> The photoelectric beam does not always detect accessories, e.g. the spoiler, properly. If in doubt, ask the car wash operator or just wash the vehicle by hand.

ATTENTION
Incorrect painting and drying processes can damage or distort components.

--> Observe the guidelines and instructions for painting plastic components in the Paint Workshop Manual.

--> Always place parts without stress on the painting devices provided during painting and drying processes.

Note:
Please pass this information on to the customer as well.








Working Time





References





Disclaimer