Safety Notes

Safety Notes

Safety instructions for work on car windows

Danger of injury when working on car windows

DANGER: Danger of cut injuries when removing and installing car windows.

- Always wear protective gloves when working on car windows.
- Wear protective goggles when cutting out car windows.
- Only replace the cutting knife with the power supply disconnected so that the cutter is not switched on accidentally.
- Cutting out glued car windows may lead to cut injuries to the skin and eyes due to flying glass splinters and may result in cut injuries from the knife of the cutter.

Material damage when removing the glass from car windows

ATTENTION: Danger of paint damage and damage to the label with the vehicle identification number if windscreen is removed incorrectly.

- When cutting out the windscreen, ensure that the label with the vehicle identification number is not damaged.

Material damage when inserting the glass into car windows

ATTENTION: Danger of material damage if specified curing time of adhesive is not observed. In order to ensure that the bonded joint is sufficiently strong, the following boundary conditions must be adhered to:

- The vehicle must not be used until the curing time has elapsed.
- Curing time: 3 hours
- Temperature: at least 10 degrees C
- Fixing time: approx. 1 hour

Safety instructions for installation work

Safety instructions for airbag system

ATTENTION: Danger of injury due to unintentional activation of airbag units.

- The ground strap of the battery must be disconnected during work on the airbag system and alignment bench jobs when the body is being repaired.
- After the battery is disconnected, assembly work or work on the vehicle with a hammer or similar tools must not be started until after a waiting period of 1 minute.

Safety instructions for sliding roof

ATTENTION: Danger of damage to the seats during the removal and fitting of the sliding roof frame.

- Fold the rear seat assembly forward and tip the front seat backrest backwards during the removal and fitting of the sliding roof frame.