Component Locations

Component arrangement






a - CAN drive (CAN-C)

b - CAN-internal

1 - Speed sensor (wheel)
- Front left
- Front right
- Rear left
- Rear right

2 - PSM control module and hydraulic unit
- Located in right radiator tank with hydraulic unit screwed on, under DME control module

3 - DME control module
- Located in right radiator tank, above hydraulic unit with PSM control module

4 - Fuse carrier at right of dashboard
- Integrated into right-hand side of dashboard

5 - Level control module
- Located between rear right wheel housing and closing panel

6 - Transverse lock control module
- Located in the left rear area

7 - Brake light disabling relay
- Located in relay carrier at left of dashboard

8 - Servotronic control module
- Located in relay carrier at left of dashboard

9 - Active brake booster with components (in left radiator tank)
- Brake master cylinder
- Pressure sensor
- Brake pedal pulse sender actuated (with release switch)
- Distance sensor

10 - Vehicle electrical system control module
- Located on right side of steering column near KESSY control module

11 - PSM OFF switch
- Located in centre console

12 - Tiptronic control module
- Located on vehicle floor under passenger's seat

13 - Transfer box control module
- Located on vehicle floor under passenger's seat

14 - Combination sensor
- Located on centre tunnel behind gearshift console

15 - Steering-angle sensor
- Integrated into steering column switch with electronic unit

16 - Instrument cluster (with Gateway)
- Integrated into dashboard