Removing and Installing Engine Carrier
Removing and installing engine carrierPreliminary work
Engine Supported On Body:
1. Support engine on the body.
Engine Guard:
2. Remove engine guard.
3. Remove the front-axle carrier.
Information
Component overview
Engine Carrier Removed:
Accessories:
Removing engine carrier
Note: This task can only be performed if the engine has been removed or suspended on the body.
Note:
^ Do not undo the engine mounts on the engine.
Engine Mount:
^ If the engine mounts have been undone on the engine -A-, they must be aligned using the engine carrier.
Fastening Screws:
1. Undo the two fastening screws to the left and right -arrows- from above on the hydraulic mounts.
Fastening Screws For Engine Carrier:
2. Undo the two fastening screws from the engine carrier -centre arrow- to the body and remove the engine carrier.
Installing engine carrier
Mount For Hydraulic Mount:
1. Install engine carrier. To do this, first position the fastening screws (M10 x 45) -arrows- on the hydraulic mounts and tighten them. Tighten the fastening nuts -A-. Tightening torque 44 ft. lbs.. Tightening torque 44 ft. lbs..
Fastening Screws For Engine Carrier:
2. Tighten the new fastening screws on the engine carrier -centre arrow-. Tightening torque 74 ft. lbs.. Torque angle 180°
Subsequent work
1. Install the front-axle carrier.
Engine Guard:
2. Mount engine guard.