Removing and Installing Engine Guard

Removing and installing engine guard
Information
Overview

Engine Cover, Complete:

Engine Cover Screws:

Removing engine guard

Front Screws:

1. Remove front engine guard. To do this, loosen the screws -1- at the front and side. Then loosen the rear -2- and front screws -3-.

Rear Screws:

2. Remove rear engine guard. To do this, loosen the fastening screws on the transmission cross member -1- and the screws on the traverse strut -2-.

Installing engine guard





1. Install the rear engine guard. To do this, screw in the front fastening screws -2- and rear fastening screws -1-.

2. Tighten front fastening screws -3- and rear fastening screws -2- and -1- Tightening torque 6.5 ft. lbs..