Fog/Driving Lamp: Adjustments

Removing And Installing Fog Lights

Preliminary work

1. For naturally-aspirated engines, the wheel housing liner must be partially removed.
2. In the case of turbo-charged engines, the front apron must be removed.

Removing fog lights

ATTENTION: Risk of short circuit.

- Before removing the headlight, remove ignition key and switch off light switch.







1. Pull off electric connector.
2. Loosen and unscrew the four fastening screws and remove the headlight.

Installing fog lights







1. Position headlight and tighten the four fastening screws. Tightening torque 2 ftlb.
2. Connect electric plug.

Adjusting fog lights







1. Insert a hexagon socket screwdriver through the opening -A- in the front apron and adjust the fog light.

Subsequent work

1. For naturally-aspirated engines, the wheel housing liner must be partially installed.
2. In the case of turbo-charged engines, the front apron must be installed.