Adjusting Headlight Mount

Adjusting Headlight Mount







1. Move the headlight "arrows A, B & C" to align it to the contour of the wing "arrows". Gap = 3 mm.







2. Tighten the two front screws first "2", then the two back screws "1" and check the gap. Loosen and re-adjust the headlight mount if necessary.
3. Remove and install the headlight at least 3 times, then check the gap again. Re-adjust the mount if necessary.
- Install the front spoiler. Refer to Removing and installing the front spoiler

Tightening Torques