Removing and Installing Halogen Bulb

Removing And Installing Halogen Bulb

Preliminary work

1. Remove main headlight.
2. Observe bulb table and installation instructions.

Removing halogen bulb

Removing dipped beam halogen bulb

WARNING: Risk of short circuit.

- Before removing the headlight, remove ignition key and switch off light switch.

NOTE: Observe instructions in Bulb table and installation instructions.







1. Open the two locking bars -1- on the headlight and remove cover -2-.







2. Pull off connector -3- and disengage securing clip -4-.







3. Remove halogen bulb -5- from housing.

Removing high beam halogen bulb

NOTE: Observe instructions in Bulb table and installation instructions.







1. Open the two locking bars -1- on the headlight and remove cover -2-.







2. Disengage securing clip.







3. Pull off connector and remove halogen bulb from housing.

Removing auxiliary high beam halogen bulb

NOTE: Observe instructions in Bulb table and installation instructions.







1. Remove cover -2-.







2. Pull connector -5- off the lamp -4-.
3. Disengage securing clip -3- and remove lamp.

Removing cornering light halogen bulb

NOTE: Observe instructions in Bulb table and installation instructions.







1. Open the two locking bars -1- on the headlight and remove cover -2-.







2. Disengage securing clip.







3. Remove lamp from housing and pull off electric lead.

Installing halogen bulb

Installing dipped beam halogen bulb

NOTE: Observe instructions in Bulb table and installation instructions.







1. Insert halogen bulb -5- into the bulb housing. Pay attention to the installation position.







2. Engage securing clip -4- and insert connector -3-.







3. Place cap -2- in position, press it down and close locking bar -1-.

Installing high beam halogen bulb

NOTE: Observe instructions in Bulb table and installation instructions.







1. Attach connector and insert halogen bulb into the bulb housing.







2. Engage securing clip.







3. Place cap -2- in position, press it down and close locking bar -1-.

Installing auxiliary high beam halogen bulb

NOTE: Observe instructions in Bulb table and installation instructions.







1. Insert halogen bulb -4- into bulb housing and engage securing clip -3-.
2. Connect connector -5- to halogen bulb -4-.







3. Fit cover -2- and make sure it is seated securely. Do not use sliding agents/lubricants.

Installing cornering light halogen bulb

NOTE: Observe instructions in Bulb table and installation instructions.







1. Insert lamp into headlight housing and connect electric lead.







2. Engage securing clip. Ensure bulb is seated properly.







3. Place cap -2- in position, press it down and close locking bar -1-.

Subsequent work

1. Install main headlight and perform function test.