Rear

Removing And Installing Wiper Arm For Rear Window Wiper System

Removing wiper arm for rear window wiper system

ATTENTION: Danger of crushing and trapping when working on the rear window wiper system.

- Before removing wiper arm, remove ignition key and switch off steering column switch.







1. Unclip cover cap -1- at side and remove it.
2. Unscrew fastening nut -2-.
3. Pivot wiper arm -3- up and down a little and remove.

Installing wiper arm for rear window wiper system

1. Activate wiper motor once and drive to end position.







2. Fit wiper arm -3- and secure with fastening nut -2-. Tightening torque 9 ftlb.
3. Fit cover cap -1- and press in until it is felt to engage.