PCM2.1 - Retrofit Including Navigation Module: Overview

Tequipment
14/07 ENU 9110 9

PCM2.1 - Including Navigation Module

Note:
This Technical Information replaces Technical Information No. 15/04 dated August 13, 2004.

Changes/additions compared to the previous TI:

=> Part numbers/order numbers for literature
=> Parts list
=> Working times

Vehicle Type:
Cayenne/Cayenne S

Model Year:
As of 2005 up to 2006

Situation:
Retrofitting

Restriction: Only for vehicles with CD radio CDR23.

Notes:
PCM2.1 including navigation module with Model Level A or B has the following equipment and functions:

^ Navigation data is now on one DVD, not on several CD-ROMs as previously supplied. This means that it is possible to navigate and produce continuous route guidance within a continent.

^ Separate DVD navigation drive under the passenger seat. As a result, the CD drive in the PCM2.1 can be used as a pure audio CD drive.

Antenna diversity is not a component of the retrofit kit for PCM2.1 including navigation module.

If "PCM2.1 including navigation module" is retrofitted at the same time as "Extended off-road navigation", the adjustment function "Compass menu" in the instrument cluster and the menu functions "Set compass magnetic field zone" and "Calibrate compass" are no longer used in the factory installed option "Compass display in instrument cluster (I-no. QR1)".

The compass display in the instrument cluster is then controlled using PCM2.1.

The optical waveguide and cover for DVD navigation drive must be ordered separately according to vehicle equipment!





Note:
Check software version of installed PCM2.1 system. If the version is only "Model Level A", it must be updated to "Model Level B" using the software (955.044.900.07) provided (see also Technical Information PCM2.1 navigation update).





Parts Information








Parts List

Note:
The Operating Instructions and Quick Reference Guide for the PCM2.1 are not included in the scope of delivery and must be ordered separately through the parts department.





Order Nos.





Materials





Tools

Component diagram:








Note:
For a better understanding of the system layout, see system diagram, Figure 3 above.





Working Time








References





Disclaimer