Rear Seat

Removing And Installing Rear Backrest

Technical values







Preliminary work

Remove back seat cushion. Refer to Removing and installing back seat cushion.

Removing rear backrest

1. Press out cover -1- with a screwdriver.







2. Unscrew fastening screw -2-.
3. Press cover -1- out to the front.







4. Unscrew fastening screw -2-.
5. Release backrest -1-, lift it out of the mounting saddle -2- (-arrow A-) and then pull it out of the bearing axle -3- (-arrow B-).







Installing rear backrest

1. Insert backrest -1- into the bearing axle -3- (-arrow A-) and engage in the mounting saddle -2- (-arrow B-).







2. Secure bearing axle -3- with the fastening screw -2-. Tightening torque: Tightening torque: 5.6 Nm (4 ftlb.)







3. Press in cover -1-.
4. Lock backrest, align it and screw in fastening screw -2- on the outer bearing -3-. Tightening torque: Tightening torque: 25 Nm (19 ftlb.)







5. Press in cover -1-.

Subsequent work

Install back seat cushion. Refer to Removing and installing back seat cushion.