Fit Cylinder Heads
Fit cylinder heads. Observe tightening sequence and tightening specification of cylinder-head screws. Initial tightening 22 ft. lbs., loosen all screws, 2nd initial tightening 15 ft. lbs. ; 2 x torque angle (final tightening) 70°
Fit cylinder heads. Observe tightening sequence and tightening specification of cylinder-head screws. Initial tightening 22 ft. lbs., loosen all screws, 2nd initial tightening 15 ft. lbs. ; 2 x torque angle (final tightening) 70°