Lighting and Horns: Specifications

Bulb Table And Installation Instruction

Bulb Table

Shape, wattage
Dipped beam, halogen H7, 55 W
Dipped beam for Bi-Xenon headlight Phillips,
Auxiliary main beam for Bi-Xenon
headlight H11, 55 W
Fog light H8, 55 W
Parking light, front W, 5 W
Right tail light, rear fog light P, 21/4 W
Brake/tail light. P, 21/4 W BV
Rear tail light, reflector P, 21/5 W
Reverse light P, 21 W
Number plate light C, 5 W
Direction indicator, front and rear PY, 21 W
Direction indicator light, side WY, 5 W
Door warning light W, 5 W
Luggage compartment light K, 10 W
Engine compartment light K, 10 W
Interior light K, 10 W
Footwell light K, 10 W
Glove compartment light K, 10 W
Reading light 6 W Xenon

Installation instructions

Installation instructions for bulbs

WARNING:
Risk of injury due to high voltage to built-in Bi-Xenon headlights.
- Switch ignition off, remove ignition key and turn off light switch.

ATTENTION:
Danger of damage to property if bulbs are used or handled incorrectly.
- Risk of damage to bulbs and bulb housing.
- Switch off ignition and remove ignition key.
- To prevent short circuits, the load in question must be switched off while changing bulbs.
- Only bulbs specified in the bulb table may be used.
- Bulbs with a higher wattage may damage the bulb housing.
- New bulbs must be clean and free of grease. Therefore, never touch the bulbs with your bare hands. Use a cloth or soft paper when changing bulbs.
- In certain states, it is compulsory to carry spare light bulbs.