Procedures

945319 Removing And Installing Side Direction Indicator Light

Removing side direction indicator light

Removing direction indicator light:

1. Insert a screwdriver through the opening in the wheel housing liner, press on the spring clamp at the direction indicator light and remove the direction indicator light.

Disconnecting electric plug connection:

2. Release the electric plug connection and disconnect it from the direction indicator light.
3. Remove the direction indicator light.

Removing bulb:

4. Unscrew the bulb holder.
5. Remove the bulb from the holder.

Installing side direction indicator light
Observe instructions in Bulb table and installation instructions.

Installing bulb:

1. Insert the new bulb into the holder.
2. Screw the holder with the bulb into the direction indicator light.

Connecting electric plug:

3. Insert the electric plug connection into the direction indicator light until the connector can be felt to engage.
4. Engage the direction indicator light in the front apron -A- and clip it in -B-.

Installing direction indicator light:

5. Check operation of direction indicator light.