Removing and Installing Backrest Pocket

742319 Removing And Installing Backrest Pocket

Removing backrest pocket






1. Press cover for backrest -1- carefully out of the backrest shell -2- using a screwdriver -3-.






2. Insert your hand into the top of the backrest cover -1- and disengage it by pulling it up out of the backrest frame -2- (-arrow A-). Then press cover for backrest together slightly in the middle -arrows B- and pull forwards and out.






NOTE: Only for vehicles with heated seats.

3. Disconnect electric plug connection for backrest seat heating -1-.






Removing backrest pocket






1. Unscrew fastening screws -1- with washers -2- on the inside.






2. Pull backrest pocket -3- out slightly at the top and disengage upwards.

Replacing cover for backrest pocket






1. Remove cover for backrest pocket.
Disengage cover for backrest pocket -1- out of the plastic frame -2- all the way round.






2. Install cover for backrest pocket.
Engage cover for backrest pocket -1- in the plastic frame -2- all the way round.






Installing backrest pocket






1. Engage backrest pocket -3- in the backrest shell and press in at the top.






2. Screw in fastening screws -1- with washers -2- on the inside onto the backrest pocket.

Installing cover for front middle backrest






NOTE: Only for vehicles with heated seats.

1. Connect electric plug connection for backrest seat heating -1-.






2. Engage cover for backrest -1- in the backrest frame -2- at the top -arrow A-.






3. Press in cover for backrest -1- in the middle -arrows B- until the locking tabs engage -inset-.
4. Press cover for backrest -1- into the backrest shell -2- at the bottom using a plastic wedge -3-.