Changing Oil For Front Final Drive
Changing oil for front final driveInformation
Notes
Note: Fill only with oil approved by Porsche.
Technical values
Technical Values:
Preliminary work
1. Raise the vehicle at the specified jacking points.
2. Remove front underbody panel.
3. Place oil collection pan under the transmission.
Draining oil for final drive
ATTENTION: Transmission cannot be filled, or only insufficiently with ATF.
Do not start engine
Do not tow vehicle
1. Unscrew oil filler screws -A-.
WARNING: Risk of scalding from hot oil
Let the oil cool down
Wear personal protective gear (goggles, gloves)
2. Unscrew oil drain plug -B- and drain transmission oil.
Filling in oil for final drive
ATTENTION: Transmission cannot be filled, or only insufficiently with ATF.
Do not start engine
Do not tow vehicle
1. Clean oil drain plug -B- and fit with new sealing ring.
2. Fill in transmission oil up to the bottom edge of the filler opening.
3. Clean oil filler screw -A- and fit with a new seal.
Subsequent work
1. Fit front underbody panel.
2. Lower the vehicle.