Removal and Replacement

Removing and installing guide sleeve

Preliminary work

1. Remove transmission.

Removing guide sleeve





1. Remove release lever and release bearing.





2. Unscrew fastening screws for the guide sleeve -arrow- and pull the guide sleeve off.

Installing guide sleeve








1. Fit guide sleeve and apply a thin coat of Kluberalfa HM83-801.
2. Grease splines of the transmission input shaft with Longtime 3 EP.





3. Coat release lever lightly with Kluberalfa HM83-801 at the contact points.





4. Fit release lever and release bearing.

Subsequent work

1. Install transmission.