Procedures

914719 Removing And Installing Radio Antenna

Removing radio antenna

Install location:

ATTENTION:
Voltage peaks may cause damage to the audio system.
- Before unplugging/removing audio components, remove ignition key and switch off audio system.

Antenna lead:

1. Before removing cowl cover, unclip the retaining clamps for the antenna lead. Disconnect antenna lead and undo the fastening screws -1-.

Radio antenna installation:

2. Turn around cowl cover and unscrew the two fastening screws -3-.
3. Unclip the radio antenna from the cowl in both places -2-.

Installing radio antenna

Radio antenna installation:

1. Clip the antenna onto the cowl cover to the left and right -2-.
2. Screw down radio antenna with both fastening screws -3-.
3. Connect the antenna lead and clip on the fuse.

Antenna lead:

4. Position the antenna on its bracket and screw it down tight with fastening screws -1-.