Removing Wiring Harness For Door

Removing And Installing Wiring Harness For Door

Removing Wiring Harness For Door

Technical values







Preliminary work

Preliminary work for wire harness for door
1. Disconnect battery.
2. Remove door trim panel.
3. Remove power window motor.
4. Remove head airbag.

Preliminary work for wire harness for door trim panel
1. Disconnect battery.
2. Remove door trim panel.

Removing wiring harness for door

Removing side footwell trim on driver's side







INFORMATION: Work is only necessary for removing or installing the wire harness for the driver's door.







1. Remove fuse carrier cover -1- ( -arrow A- ).
2. Unscrew the three fastening screws -2- and take off the footwell trim panel -3- ( -arrow B- ).

Removing side footwell trim on passenger's side







INFORMATION: Work is only necessary for removing or installing the wire harness for the passenger's door.







1. Partly loosen carpet -1- at the bottom in the area of the A-pillar -arrow A-.
2. Unscrew both plastic nuts -2- and take off the footwell trim panel -3- ( -arrow B- ).

Disconnect wire harness for door (driver's side) at the A-pillar












1. Unclip wire harness plug connection for door -1- at the fuse carrier -2-.







2. Release locking mechanism -5- on the wire harness plug connection for door -6- ( -arrow B- ) and disconnect it -arrow C-.







3. Remove rubber sleeve -7- and pull out together with the wire harness for door -8- from the A-pillar.

Disconnect wire harness for door (passenger's side) at the A-pillar












1. Disengage wire harness plug connection for door to the body.







2. Release locking mechanism on the wire harness plug connection for door -arrow A- and disconnect wire harness plug connection for door -arrow B-.







3. Remove rubber sleeve and pull out together with the wire harness for door from the A-pillar.

Removing wire harness for door







1. Remove door sub-frame.







2. Release connector on bass loudspeaker -arrows a- and pull off.







3. Unclip wire harness for door at the five retaining clips -arrows A-. Remove both rubber sleeves -arrow B- and take off wire harness for door.

Removing wire harness for door trim panel







1. Release connector on switch for power windows -2- and remove it.
2. Release and pull off connector on midrange loudspeaker -3-.
3. Release connector on switch for memory seat adjustment -4- and remove it.
4. Pull off connector on door warning light -7-.







5. Unclip connector on plug connection for wire harness for door trim panel to door wire harness at the door trim panel -arrow A-.
6. Remove wire harness from the clips on the door trim panel in -direction of arrow-.