Changing Oil For Final Drive

Changing oil for final drive

Tools





Information

Notes

Note: Fill only with oil approved by Porsche.

Note: Hot vehicles should cool down before beginning the activity.

Note: Vehicle must be horizontal in order to be filled and checked.

Technical values

Filling capacities

Filling Capacities:

Preliminary work

1. Raise the vehicle at the prescribed jacking points.
2. Remove the underbody panels.
3. Place oil collection pan under the transmission.

Changing oil for final drive

Draining oil for final drive

WARNING: Danger of scalding and chemical burns from hot ATF
Allow ATF to cool down
Wear personal protective gear (goggles, gloves)





1. Unscrew oil filler plug.





WARNING: Oil for rear final drive can emerge
Oil for final drive is harmful to the eyes
Wear personal protective gear (goggles, gloves)

WARNING: Hot oil for rear final drive can emerge
Hot oil for final drive is harmful to the eyes and can cause scalding
Always allow oil for final drive to cool down before starting work
Wear personal protective gear (goggles, gloves)

2. Unscrew oil drain plug and drain oil.
3. Replace sealing ring for drain plug, clean drain plug, and tighten. Tightening torque: 19 ft lb.

Topping up oil for final drive

WARNING: Oil for rear final drive can emerge
Oil for final drive is harmful to the eyes
Wear personal protective gear (goggles, gloves)

WARNING: Hot oil for rear final drive can emerge
Hot oil for final drive is harmful to the eyes and can cause scalding
Always allow oil for final drive to cool down before starting work
Wear personal protective gear (goggles, gloves)

1. Fill oil for final drive with ATF filling device for filling transmission NR.161 until oil escapes at the oil filler opening.





Replace sealing ring for filler plug, clean filler plug, and tighten. Tightening torque: 16 ft lb.
2. Fit the underbody panel.

Subsequent work

Reworking
1. Fit underbody panels.
2. Lower the vehicle.