Checking and Topping Up Oil For Front Final Drive
Checking and topping up oil for front final driveInformation
Notes
Note: Fill only with oil approved by Porsche.
Preliminary work
1. Raise the vehicle at the specified jacking points.
2. Remove front underbody panel.
3. Place oil collection pan under the transmission.
Checking and topping up oil for front-aide final drive
1. Unscrew oil filler screw -A-.
WARNING: Risk of scalding from hot oil
Let the oil cool down
Wear personal protective gear (goggles, gloves)
The oil level is correct if transmission oil emerges. Continue with step 3.
If transmission oil does not flow out, the oil level in the final drive is too low. Continue with step 2.
2. Fill in transmission oil up to the bottom edge of the filler opening.
3. Clean oil filler plug and screw in with a new sealing ring.
Subsequent work
1. Fit front underbody panel.
2. Lower the vehicle.