Crankshaft Main Bearing

Crankshaft Main Bearing

Position 14 M9 127 thrust-bearing screws manually. Pre-tighten screws to the required tightening torque in accordance with the tightening sequence.
Then tighten to the required torque angle.
Initial tightening: 15 (11 ft. lb.) Nm
Torque angle: 120°








Crankcase half
Tighten all screws in the cross bolt connection to the required torque in accordance with the specified tightening sequence.

Tightening Torque: 9.5 ft. lb.