Manual Transmission/Transaxle

Oil filler plug on manual transmision Tightening torque 40 Nm (30 ftlb.)

Transmission/engine connection Hexagon-head bolt no. 1 in figure, M12 x 70
Tightening torque 85 Nm (63 ftlb.)

Transmission/engine connection Hexagon-head bolt no. 2 in figure, M12 x 100
Tightening torque 85 Nm (63 ftlb.)

Transmission/engine connection Hexagon-head bolt no. 3 in figure, M12 x 100
Tightening torque 85 Nm (63 ftlb.)

Transmission/engine connection Internal serration screw no. 4 in figure, M10 x 50
Tightening torque 46 NM (34 ftlb.)

Transmission/engine connection Hexagon-head bolt no. 5 in figure, M10 x 50
Tightening torque 46 Nm (34 ftlb.)

Transmission/engine connection Hexagon-head bolt no. 6 in figure, M12 x 50
Tightening torque 85 Nm (63 ftlb.)

Transmission/engine connection Hexagon-head bolt no. 7 in figure, M12 x 70
Tightening torque 85 Nm (63 ftlb.)

Transmission/engine connection Hexagon-head bolt no. 8 in figure, M12 x 70
Tightening torque 85 Nm (63 ftlb.)

Hydraulic line of clutch control
Tightening torque 30 Nm (22 ftlb.)

Cable duct Fastening screws between cable duct and transmission
Tightening torque 10 Nm (7.5 ftlb.)

Transmission support tightening torque 65 Nm (48 ftlb.)
Transmission Holder Tightening torque 65 Nm (48 ftlb.)

Length of the measuring lever
Adjustment Value 68 mm

Fastening screw between differential cover and transmission housing
Tightening torque 43 Nm (32 ftlb.)

Fastening screw between differential cover and transmission housing
Tightening torque 43 Nm (32 ftlb.)

Fastening screws between crown wheel and differential
Tightening torque 140 Nm (104 ftlb.)

Fastening screw between differential cover and transmission housing
Tightening torque 43 Nm (32 ftlb.)

Length of the measuring lever
Adjustment value 68 mm

Fastening screw between differential cover and transmission housing
Tightening torque 43 Nm (32 ftlb.)