Checking and Topping Up Oil For Front Final Drive

Checking and topping up oil for front final drive





Information

Notes

Information
Fill only with oil approved by Porsche. See Spare Parts Catalog.

Preliminary work

1. Raise the vehicle at the specified jacking points.
2. Remove front underbody panel.
3. Place oil collection pan under the transmission.

Checking and topping up oil for front final drive

Checking and topping up oil for front-axle final drive

1. Unscrew oil filler screw -A-.





Oil filler screw

Warning
Risk of scalding from hot oil

-> Let the oil cool down

-> Wear personal protective gear (goggles, gloves)

The oil level is correct if transmission oil emerges. Continue with step 3.

If transmission oil does not flow out, the oil level in the final drive is too low. Continue with step 2.

2. Fill in transmission oil up to the bottom edge of the filler opening.
3. Clean oil filler plug and screw in with a new sealing ring.





Subsequent work

1. Fit front underbody panel.
2. Lower the vehicle.