Removing and Refitting Transmission

Removing and refitting transmission





Preliminary work

1. Remove engine-transmission unit.

Removing transmission

1. Unclip coolant lines from the holders.





Cross member

2. Remove cable duct. To do this, undo the screws and move the cable duct towards the engine.





Cable duct

3. Attach transmission to workshop crane.
4. Unscrew eight connecting bolts between the engine and transmission and pull out the transmission to the rear.

Refitting transmission

1. Attach transmission to workshop crane.
2. Refit transmission and screw in connecting bolts.





Connecting screws





3. Fit cable duct.





Cable duct





4. Engage coolant lines in holder.





Coolant lines

Subsequent work

1. Install engine-transmission unit.