Removing and Installing Additional Flap - Convertible Top

Removing And Installing Additional Flap

Preliminary work
Move convertible top to service position. Refer to IN -Convertible top in service position

Removing additional flap






1. Press locking lever -1- toward the front -arrow A- (direction of travel).






2. Pull additional flap -2- backward -arrow B- and pull downwards out from hinge pins B of the convertible-top compartment lid -3- -arrow C-.

Installing additional flap






1. Insert additional flap -2- upward onto hinge pins of the convertible-top compartment lid -3- -arrow A- and pull forward -arrow B-.






2. Pull locking lever -1- backward -arrow C- (against direction of travel) to lock the additional flap. The additional flap -2- is locked if locking lever -1- projects approx. 5 to 8 mm over the body of the additional flap in the area of dimension -X-.
3. End convertible top service position.