Removing and Installing Wire Harness For Tiptronic Transmission

Removing And Installing Wire Harness For Tiptronic Transmission

Preliminary work
1. Remove rear underbody cover.

Removing wire harness for Tiptronic transmission












1. Disconnect plug connection between wire harness for Tiptronic transmission and rear wire harness -1-.
1.1. Unclip plug connection between wire harness for Tiptronic transmission and rear wire harness -Arrow B-
1.2. Disconnect plug connection between wire harness for Tiptronic transmission and rear wire harness -Arrow a- -Arrows C-.







2. Pull off connector on change-over valve -2-.
2.1. Release connector on change-over valve -Arrow a- and pull off.







3. Pull off connector on Tiptronic transmission -3-.
3.1. Release connector on Tiptronic transmission by turning anti-clockwise -Arrow a- and remove -Arrow B-







4. Remove wire harness for Tiptronic transmission.
4.1. Unclip and remove wire harness for Tiptronic transmission from the sheetmetal clips.

Installing wire harness for Tiptronic transmission












1. Install wire harness for Tiptronic transmission.
1.1. Lay wire harness for Tiptronic transmission and clip into the sheetmetal clips.







2. Push connector onto Tiptronic transmission -3-.
2.1. Push connector onto Tiptronic transmission -Arrow A- and lock by turning clockwise -Arrow B-.







3. Push connector onto change-over valve -2-.
3.1. Push connector onto change-over valve until it is felt to engage.







4. Push together plug connection between wire harness for Tiptronic transmission and rear wire harness -1-.
4.1. Push together plug connection between wire harness for Tiptronic transmission and rear wire harness until it is felt to engage -Arrows A-.
4.2. Clip in plug connection between wire harness for Tiptronic transmission and rear wire harness -Arrow B-.

Subsequent work
1. Install rear underbody cover.