Steering Mounted Controls Assembly: Service and Repair

Removing And Installing Multi-Function Remote Control

Preliminary work

Preliminary work for multi-function remote control
Remove driver's airbag unit.

Removing multi-function remote control












1. Unscrew the fastening screws -2- and washers -3- for the remote control and carefully lever the remote control out using a screwdriver.







2. Release the electric plug connection on the remote control -A- and disconnect it.
3. Remove remote control.

Installing multi-function remote control







1. Insert electric connector into the remote control until it clicks into place.







2. Insert remote control into the steering wheel, position washers -3- and screw down with the fastening screw -2-.

Subsequent work

Subsequent work for multi-function remote control
Install driver's airbag unit.