Checking and Topping Up Oil For Final Drive

WM 399035 Checking and topping up oil for final drive








Information

Notes

Note
Fill only with oil approved by Porsche. See Spare Parts Catalogue.

Note
Hot vehicles should cool down before beginning the activity.

Note
Vehicle must be horizontal in order to be filled and checked.

Preliminary work

Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove the underbody panels.
3. Place oil collection pan under the transmission.

Checking and topping up oil for final drive

Checking and topping up oil for final drive

Warning
Oil for rear final drive can emerge
^ Oil for final drive is harmful to the eyes

--> Wear personal protective gear (goggles, gloves)

Warning
Hot oil for rear final drive can emerge
^ Hot oil for final drive is harmful to the eyes and can cause scalding

--> Always allow oil for final drive to cool down before starting work
--> Wear personal protective gear (goggles, gloves)
1. Unscrew oil filler plug.





If oil escapes, the oil level in final drive is OK. Continue with position 3.

If no oil escapes, the oil level in final drive is too low. Continue with position 2.

2. Fill oil for final drive with ATF filling device for filling transmission NR.161 until oil escapes at the oil filler opening.
3. Replace sealing ring for filler plug, clean filler plug, and tighten. --> Tightening torque: 16 ftlb.

Subsequent work

Reworking
1. Fit underbody panels.
2. Lower the vehicle.