Antenna, Radio: Service and Repair

Removing And Installing Radio Antenna

Removing radio antenna







CAUTION:
Voltage peaks can damage the audio system.
- Before unplugging/removing audio components, remove ignition key and switch off audio system.







1. Before removing cowl cover, unclip the retaining clamps for the antenna lead. Disconnect antenna lead and undo the fastening screws -1-.







2. Turn around cowl cover and unscrew the two fastening screws -3-.
3. Unclip the radio antenna from the cowl in both places -2-.

Installing radio antenna







1. Clip the antenna onto the cowl cover to the left and right -2-.
2. Screw down radio antenna with both fastening screws -3-.







3. Connect the antenna lead and clip on the fuse.
4. Position the antenna on its bracket and screw it down tight with fastening screws -1-.