Removing and Installing Front Bumper

631019 Removing And Installing Front Bumper

Preliminary work
1. Remove front apron.

NOTE: Only open for vehicles with garage door function.

2. Remove control unit for garage door opener.

Removing front bumper

Installation Position Of Front Bumper:

1. Unscrew fastening screws -1- and remove bumper -2-.

Removing The Front Bumper:

Installing front bumper

Installation Position Of Front Bumper:

1. Position bumper -2-.

Installing The Front Bumper:

2. Screw in fastening screws -1- and tighten to the specified tightening torque.
Tightening torque: Final tightening 63 ftlb.

Subsequent work

NOTE: Only open for vehicles with garage door function.

1. Install control unit for garage door opener.
2. Install front apron.