Removing and Installing Rear Member

637319 Removing And Installing Rear Member

Preliminary work
1. Remove rear spoiler.
2. Remove rear bumper.

Removing rear member

Removing rear impact pipe

Installation Location Of Rear Carrier:

1. Undo fastening screws -1-.

Removing Impact Pipe:

2. Remove the impact pipe -2- with seal -3-.

Removing impact absorber

Installation Location Of Rear Carrier:

1. Undo fastening screws -1-.

Removing Impact Absorber:

2. Remove the impact absorber (Canada version)-2- with seal -3-.

Installing rear member

Install rear impact pipe

Installation Location Of Rear Carrier:

1. Position the impact pipe -2- with seal -3-.

Installing Impact Pipe:

2. Screw in fastening screws -1- and tighten to the required tightening torque Tightening torque 17 ftlb.

Installing impact absorber

Installation Location Of Rear Carrier:

1. Position the impact absorber (Canada version)-2- with seal -3-.

Installing Impact Absorber:

2. Screw in fastening screws -1- and tighten to the required tightening torque Tightening torque 17 ftlb.

Subsequent work
1. Install rear bumper.
2. Install rear spoiler.