Hood: Adjustments

Adjusting front lid

Tools







Technical values







Adjusting front lid

Adjusting lid in X and Y direction







INFORMATION: Use star gauges to set and measure the gap dimensions. Star gauges for body gap dimensions NR.127-1.

1. Check body gap dimensions. Refer to Diagram - body gap dimensions.







2. Loosen fastening screw -1- on both sides on front lid -2-.

Adjusting lid in Z direction







1. Loosen fastening screws -1- on both front lid hinges -2-.







Adjusting front lid







1. By moving the front lid -2- at the hinges -2-, adjust the contours to the wings, main headlights and front apron. Refer to Diagram - body gap dimensions.







2. Tighten fastening screws -1-. Tightening torque : 7.2 ftlb.
3. Tighten fastening screws -1-. Tightening torque : 7.2 ftlb.