G4.1 - Quick Overview - Quickfinder

G 4.1 Quick Overview - Quickfinder

WARNING:
- The procedures and materials described by Porsche AG in this guide are generally the best with regard to economic viability, quality of the paint finish and environmental protection. They have been tested and approved.
- In individual cases, however, alternative material components from the same manufacturer can also be used.
- In this case, Porsche AG assumes no responsibility whatsoever for the result of the paint finish.

In order to use the Quickfinder, the first thing you must do is decide whether the part to be painted is a metal or plastic component:
- The part to be painted is a metal component: -> G 4.1.1 "Quickfinder for metal components"
- The part to be painted is a plastic component: -> G 4.1.1 "Quickfinder for plastic components"

G 4.1.1 Quickfinder for metal components







G 4.1.2 Quickfinder for plastic components







G4.2 - Method For Deciding on the Correct Procedure