Removing and Installing Tailpipe

263420 Removing And Installing Tailpipe

Removing tailpipe

DANGER: Incorrect raising of the vehicle.
- Damage to person or property caused by the car falling down
- Raise the vehicle at the prescribed jacking points.

1. Undo hexagon nut (M10) -arrow- of clamp.

Clamp For Tailpipe:

2. Open up clamp.
3. Remove tailpipe.

Installing tailpipe
1. Push on tailpipe with clamp.
2. Adjust tailpipe position as shown below.
a - 28 mm
b - 28 mm
c - 34 mm
d - 29 mm

Assembly Position For Tailpipe:

3. Tighten hexagon nut (M10) -arrow- on clamp. Tightening torque 33 ftlb.