Brake Light Switch: Service and Repair

Removing And Installing Brake Light Switch

Removing brake light switch







1. Switch off ignition and remove ignition key.







2. Disengage plug from stop light switch on both sides (Arrows a) and remove.







3. Turn brake light switch 90° counter-clockwise and remove it.

Installing brake light switch

Installing stop light switch

INFORMATION:
- The brake light switch setting is firmly fixed and is not adjustable.
- The brake light switch may be fitted only once in order to ensure that it fits tightly.







1. Before fitting the stop light switch, pull out the plunger (arrow) out of the stop light switch until the stop.
2. Insert stop light switch with the bayonet lock take-up bore, press in, and turn clockwise by 90°. This sets the tappet push rod to the exact length.







3. Position and insert the plug until it is felt to engage.