Skid Plate: Service and Repair

Removing and installing engine guard

Information

Overview








Removing engine guard





1. Remove front engine guard. To do this, loosen the screws -1- at the front and side. Then loosen the rear -2- and front screws -3-.





2. Remove rear engine guard. To do this, loosen the fastening screws on the transmission cross member -1- and the screws on the traverse strut -2-.

Installing engine guard





1. Install the rear engine guard. To do this, screw in the front fastening screws-2- and rear fastening screws-1-.





2. Tighten front fastening screws -3- and rear fastening screws-2- and -1- Tightening torque: 6.5 ft-lb.