Headlamp Motor: Service and Repair

Removing And Installing Servo Motor For Headlight Beam Adjustment

Preliminary work

NOTE: This document describes the servo motors for Bi-Xenon and halogen headlights.

1. Remove main headlight.
2. Open cover cap on headlight.

Removing servo motor

Bi-Xenon headlight
1. Unscrew the fastening screws.







2. Push servo motor downwards and out, and disconnect the electric wire.







3. Turn the cage (bayonet lock) and remove from servo motor.







Halogen headlight
1. Unscrew the fastening screws.







2. Push servo motor downwards and out, and disconnect the electric wire.







3. Turn the cage (bayonet lock) and remove from servo motor.







Installing servo motor

Bi-Xenon headlight
1. Slide the cage onto the servo motor and turn in direction of arrow (bayonet lock).







2. Connect electric plug connection to servo motor and slide servo motor into the mount from below.







3. Tighten fastening screws. Tightening torque: 2 ftlb.







Halogen headlight
1. Slide the cage onto the servo motor and turn in direction of arrow (bayonet lock).







2. Connect electric plug connection to servo motor and slide servo motor into the mount from below.







3. Tighten fastening screws. Tightening torque: 2 ftlb.







Subsequent work
1. Close the cap.
2. Install main headlight.