Removing and Installing Engine Mounting 2

Removing and installing engine mounting

Preliminary work

1. Remove engine carrier.

Information

Component overview











Removing engine mounting

Note: On the Cayenne (BFD), this task can only be performed if the engine has been removed or suspended on the body. This description covers suspension on the body.





1. Undo engine mounts. To do this, undo the fastening nuts -A- on the support arms and remove the engine mounts.

Installing engine mounting

Installing engine mounts

Note:
^ The engine mounts must be aligned using the engine carrier.
^ The engine mounts differ (left/right) and must not be interchanged.

1. Position engine mounts on the support arm. When doing so, note the positioning pin on the mount. It must engage in the recess on the support arm.
2. Position new fastening nuts -A- and screw them on so that the positioning pin cannot pop out. Do not tighten the fastening nuts.





3. Fit the engine carrier. To do this, position the fastening screws of the hydraulic mount -arrows- and tighten. Tightening torque: 44 ft-lb.
4. Tighten engine mounts on the engine. Tighten the fastening nut -A-. Tightening torque: 56 ft-lb.

Subsequent work

1. Install engine carrier.