Timing Components: Specifications

Belt pulley (vibration balancer) on crankshaft M16 x 1.5 x 77
Initial tightening: 20 Nm (15 ft-lb.)
Initial tightening: 50 Nm (37 ft-lb.)
Initial tightening: 250 Nm (185 ft-lb.)
Then 90° (always replace screw)

Belt tensioner on bracket M8 x 33 35 Nm (19 ftlb.)
Belt tensioner on timing case cover M8 x 100 35 Nm (19 ftlb.)
Tensioner roller on belt tensioner M10 35 Nm (19 ftlb.)

Tightening Sequences (Part 1):

Timing Case Cover
M6 (6 M6 x 56 screws and 1 M6 x 20 screw)
Tightening torque: 8 Nm (6 ft-lb.)
M8 x 28
Tightening torque: 23 Nm (17 ft-lb.)

Chain tensioner M24 x 1.5 60 Nm (44 ftlb.)