Glove Box Lamp Switch: Service and Repair

Removing And Installing Contact Switch For Glove Compartment Light

Preliminary work
Remove glove compartment.

Removing contact switch for glove compartment light







1. Release connector -Arrow A- and remove from contact switch -Arrow B-.







2. Unlock contact switch -Arrows A-.







3. Press contact switch inwards -Arrow B- until the guide pin -1-pops out of the bore.

Installing contact switch for glove compartment light
1. Insert contact switch into the bore -Arrow A- and screw it into the bracket -Arrow B- until the locking tabs are felt to engage.







2. Push connector into contact switch -Arrow A- until it is felt to engage -Arrow B-.







Subsequent work
Install glove compartment.